Dynamics of a particle moving in a straight line or plane
M1 Topic 4, spec point by spec point (Dynamics of a particle moving in a straight line or plane). Each spec point has the method, worked examples written the way the mark scheme wants them, how the marks go and the mistakes that cost the most marks.
Spec4.1Forces and Newton's laws of motion
Understand force and Newton's laws, and solve problems with constant acceleration in scalar form or as a vector \(a\mathbf{i} + b\mathbf{j}\).
Newton's three laws
- First: an object stays at rest or moves with constant velocity unless a resultant force acts on it.
- Second: resultant force equals mass times acceleration, \(\mathbf{F} = m\mathbf{a}\). The acceleration is in the direction of the resultant force.
- Third: if \(A\) pushes \(B\), then \(B\) pushes \(A\) with an equal and opposite force. (These act on different objects.)
Method for any dynamics question
- Draw a force diagram for each object: weight \(mg\) down, normal reaction \(R\) perpendicular to the surface, tension \(T\) along strings, friction \(F\) along surfaces opposing motion, any driving force or resistance.
- Mark the direction of acceleration.
- Write \(F = ma\) in that direction: (forces with \(a\)) \(-\) (forces against \(a\)) \(= ma\).
- Resolve perpendicular to the motion if you need \(R\) (no acceleration that way).
Vector forces
Add the forces to get the resultant, then \(\mathbf{F} = m\mathbf{a}\). The magnitude of the acceleration is \(\frac{|\mathbf{F}|}{m}\).
vector forces
Forces \((3\mathbf{i} + \mathbf{j})\) N and \((5\mathbf{i} - 16\mathbf{j})\) N act on a particle on a smooth horizontal plane, giving an acceleration of magnitude 68 m s⁻². Find its mass.
Resultant \(= 8\mathbf{i} - 15\mathbf{j}\), magnitude \(\sqrt{64 + 225} = 17\) N. \(17 = 68m\), so \(m = 0.25\) kg.
two stages of motion
A 250 kg package falls freely from rest for 5 s, then a constant resistance of 3200 N acts until it lands. It started 520 m above the ground. Find its landing speed.
Stage 1: \(v = 9.8(5) = 49\) m s⁻¹, distance \(\frac12(9.8)(25) = 122.5\) m.
Stage 2: down positive, \(250g - 3200 = 250a \Rightarrow a = -3\) m s⁻².
\(v^2 = 49^2 + 2(-3)(520 - 122.5) = 2401 - 2385 = 16\), so it lands at 4 m s⁻¹.
- M1 for the resultant (adding, not subtracting), M1 for \(\mathbf{F} = m\mathbf{a}\) with no weight term on a horizontal plane, M1 for Pythagoras, A1 (WME01A Jun 2026 Q4a).
- Two stages: B1 for the speed at the change, M1 A1 for the new equation of motion, A1 for \(a\), M1 A1 for suvat with the new \(a\) and the stage-1 speed as \(u\), A1. Using \(u = 0\) for stage 2 is M0 (WME01 May 2024 Q5b).
Often asked as: lifts, falling objects with resistance, vector forces with an unknown \(\lambda\) (WME01 Jun 2021 Q3b).
Including the weight in a horizontal equation of motion.
Forgetting the resistance acts against the motion.
Spec4.2Connected particles
Solve problems on two connected particles moving in a line or under gravity, over smooth pulleys or pegs, with forces that may change (e.g. one particle hits the ground), and on smooth or rough inclined planes.
The idea
Each particle obeys \(F = ma\) on its own. A light inextensible string links them: same tension and same acceleration (in their own directions of motion).
Method
- Write an equation of motion for each particle (along its own direction of motion), then solve simultaneously.
- Or: treat the whole system as one object to get \(a\) quickly (the tension is internal and cancels), then use one particle's equation for \(T\).
- A towbar can be in tension (pulling) or thrust (pushing, e.g. when braking).
When a particle hits the ground
The string goes slack: tension becomes 0. The other particle now moves under different forces: work out its new acceleration and use its speed at that moment as its new \(u\).
Force on a pulley
The string presses on the pulley with the resultant of the two tensions (see 5.1).
car and trailer braking
A car pulls a 600 kg trailer with a light towbar. The resistances are 200 N on the car and 100 N on the trailer. A braking force of 6500 N on the car gives a deceleration of 4 m s⁻². Find the force in the towbar and the mass of the car.
Trailer (forwards positive): \(-100 - T = 600(-4) \Rightarrow T = 2300\) N. Positive, so the towbar pushes back on the trailer: a thrust of 2300 N.
Car: \(-6500 - 200 + 2300 = M(-4) \Rightarrow M = 1100\) kg.
Check with the whole system: \(-6800 = 1700(-4)\) ✓.
table and pulley
\(A\) (2 kg) lies on a smooth horizontal table, connected over a smooth pulley at the edge to \(B\) (3 kg) hanging freely. Find the acceleration and tension.
\(B\): \(3g - T = 3a\). \(A\): \(T = 2a\). Add: \(3g = 5a\), so \(a = 5.88\) m s⁻² and \(T = 11.8\) N.
- M1 for an equation of motion for one particle with the correct terms (sign errors condoned), A1 for it, then A1 for the value. Using the wrong mass in a particle's equation loses the marks (WME01A Jan 2026 Q6a).
- Pulleys: M1 A1 for each particle's equation; a whole-system equation can replace one of them (WME01 Jan 2021 Q8a).
Often asked as: cars and trailers; trucks and towbars (WME01 Oct 2018 Q7b); particles over pulleys on tables or slopes; what happens after one particle hits the ground.
Using the total mass in one particle's equation.
Putting \(g\) in the equation of the particle on a horizontal table.
Forgetting the slack string after impact.
Spec4.3Momentum and impulse
Use momentum, impulse, the impulse–momentum principle and conservation of momentum for two particles colliding directly (one dimension).
The definitions
- Momentum \(= mv\) (kg m s⁻¹ or N s). It has a direction.
- Impulse \(=\) change in momentum: \(I = mv - mu\) (N s). For a constant force, \(I = Ft\).
- Conservation of momentum: in a collision the impulses on the two particles are equal and opposite (Newton's third law), so the total momentum before equals the total after:
\[m_1u_1 + m_2u_2 = m_1v_1 + m_2v_2\]
Method
- Draw "before" and "after" diagrams with masses and velocities.
- Choose a positive direction. Velocities the other way are negative.
- Use conservation of momentum, or impulse on one particle.
- A negative answer means the particle moves the opposite way to your arrow. "Speed" is positive; say the direction separately.
impulse and conservation
\(P\) (mass \(2m\), speed \(2u\)) and \(Q\) (mass \(3m\), speed \(u\)) move towards each other and collide. The impulse on \(P\) has magnitude \(5mu\). Find the velocities after the collision.
Positive in \(P\)'s original direction. The impulse on \(P\) acts against its motion: \(-5mu = 2m(v_P - 2u)\), so \(v_P = -\frac{u}{2}\). \(P\) moves back at speed \(\frac{u}{2}\).
Momentum: \(2m(2u) + 3m(-u) = 2m\left(-\frac{u}{2}\right) + 3mv_Q \Rightarrow v_Q = \frac{2u}{3}\), in \(P\)'s original direction.
- M1 for impulse \(=\) change of momentum for one particle, with the same mass in both terms (sign errors condoned; adding momenta is M0), A1 for a correct equation, A1 for the speed (positive) (WME01A Jan 2026 Q1a).
- Conservation: M1 for correct pairings of masses and velocities, A1, A1; B1 for units N s where asked (WME01 Oct 2018 Q1).
- Direction: a mark for stating whether the direction has reversed (WME01 Jun 2022 Q1).
Often asked as: find a speed, the impulse, a mass ratio \(k\) (WME01 Jun 2025 Q1b), or whether directions reverse.
Forgetting the minus sign for a particle moving the other way.
Giving a negative "speed".
Spec4.4Friction when moving
Use \(F = \mu R\) for a particle that is moving.
The idea
When a particle slides on a rough surface, friction has its maximum value and acts against the direction of motion:
\[F = \mu R\]
\(R\) is the normal reaction, found by resolving perpendicular to the surface. On a slope of angle \(\alpha\) with no other perpendicular forces, \(R = mg\cos\alpha\).
On a slope
- Moving up: weight component \(mg\sin\alpha\) and friction both act down the slope.
- Moving down: weight component down, friction up the slope.
- After stopping on the way up, it slides back only if \(mg\sin\alpha > \mu mg\cos\alpha\) (i.e. \(\tan\alpha > \mu\)). The acceleration down is different from the deceleration up.
up and back down a rough slope
A particle is projected at 5 m s⁻¹ up a rough plane inclined at \(\alpha\) with \(\tan\alpha = \frac34\), \(\mu = 0.5\). Find how far it travels up, and its speed when it returns to the start.
\(\sin\alpha = 0.6\), \(\cos\alpha = 0.8\). \(R = 0.8mg\), \(F = 0.4mg\).
Up: \(-0.6mg - 0.4mg = ma \Rightarrow a = -g\). \(0 = 25 - 2gs \Rightarrow s = 1.28\) m.
It slides back because \(\tan\alpha = 0.75 > 0.5\). Down: \(0.6mg - 0.4mg = ma \Rightarrow a = 0.2g\).
\(v^2 = 2(0.2g)(1.276) = 5\), so \(v = 2.24\) m s⁻¹.
- M1 A1 for resolving perpendicular to get \(R\) (\(R = mg\) on a slope is M0), M1 for \(F = \mu R\), M1 A1 for the equation of motion along the slope with all terms, DM1 for solving (WME01 Oct 2025 Q7b).
- Then M1 A1 for suvat with the calculated \(a\), not \(g\) (WME01 Jun 2021 Q6b); coming back down needs the friction reversed and a new \(a\) (WME01 Jun 2018 Q4c).
Often asked as: particles projected up slopes; connected particles on rough planes; show a string length must exceed a value after one particle lands (WME01A Jan 2026 Q8c).
\(R = mg\) on a slope.
Keeping friction in the same direction after the particle reverses.
Using \(\sin\) and \(\cos\) the wrong way round.