Statics of a particle
M1 Topic 5, spec point by spec point (Statics of a particle). Each spec point has the method, worked examples written the way the mark scheme wants them, how the marks go and the mistakes that cost the most marks.
Spec5.1Forces as vectors: resolving
Treat forces as vectors and resolve them into components.
The idea
A force \(F\) at angle \(\theta\) to a direction has a component \(F\cos\theta\) along that direction and \(F\sin\theta\) perpendicular to it. "The angle you're next to gets cos."
Resolving lets you add forces in any directions: add all the components one way, all the components the other way, then combine with Pythagoras and trig.
On a slope, resolve parallel and perpendicular to the slope. The weight \(mg\) has components \(mg\sin\alpha\) down the slope and \(mg\cos\alpha\) into it.
Force on a pulley
A string over a pulley pulls with tension \(T\) along each side. The force on the pulley is the resultant of the two tensions. If the strings meet at angle \(\phi\), the resultant is \(2T\cos\frac{\phi}{2}\), along the bisector of the angle.
force on a pulley
A string with tension 30 N passes over a smooth pulley. The two parts of the string are at \(60°\) to each other. Find the force on the pulley.
\(2 \times 30\cos 30° = 52.0\) N, along the bisector of the angle between the strings.
a resultant
Forces of 10 N east and 15 N on a bearing of \(060°\) act on a particle. Find the resultant.
East: \(10 + 15\sin 60° = 22.99\). North: \(15\cos 60° = 7.5\).
Magnitude \(= \sqrt{22.99^2 + 7.5^2} = 24.2\) N, at \(\arctan\frac{7.5}{22.99} = 18.1°\) north of east (bearing \(072°\)).
- Force on a pulley: M1 for \(2T\cos\frac{\phi}{2}\) (or cosine rule, or components), A1, DM1 for substituting their \(T\), A1 (WME01 Jan 2019 Q7c). If the strings are perpendicular, the force is \(T\sqrt2\); if parallel, \(2T\) (WME01 Oct 2024 Q5c).
- Direction: "downwards at \(\left(90 - \frac{\alpha}{2}\right)°\) to the horizontal", or a clear diagram (WME01 Jun 2026 Q8e).
Often asked as: the last parts of a pulley question; resultants of several forces.
Swapping \(\sin\) and \(\cos\).
Spec5.2Equilibrium of a particle
Solve equilibrium problems for a particle under coplanar forces: weight, normal reaction, tension, thrust and friction.
The idea
In equilibrium the resultant force is zero. So the components in any direction add to zero. Resolve in two perpendicular directions to get two equations.
Choosing directions: along and perpendicular to a slope, or horizontal and vertical, or along an unknown force to remove it from one equation.
two strings
A 5 kg particle hangs from two strings at \(30°\) and \(60°\) to the horizontal. Find the tensions.
Horizontal: \(T_1\cos 30° = T_2\cos 60° \Rightarrow T_2 = \sqrt3\,T_1\).
Vertical: \(T_1\sin 30° + T_2\sin 60° = 5g \Rightarrow \frac12T_1 + \frac32T_1 = 49 \Rightarrow T_1 = 24.5\) N.
\(T_2 = 24.5\sqrt3 = 42.4\) N.
dragging at constant speed
A 40 kg suitcase is dragged at constant speed along a rough floor (\(\mu = 0.75\)) by a strap at \(20°\) above the horizontal. Find the tension.
Constant speed means equilibrium. Vertical: \(R + T\sin 20° = 40g\). Horizontal: \(T\cos 20° = 0.75R\).
\(T\cos 20° = 0.75(40g - T\sin 20°) \Rightarrow T = \dfrac{30g}{\cos 20° + 0.75\sin 20°} = 246\) N.
- M1 A1 for each resolution, B1 for \(F = \mu R\), dM1 for eliminating \(R\) and solving, A1. Leaving out the vertical component of \(T\) when finding \(R\) is the common slip (WME01A Jan 2026 Q2).
- Geometry first if angles aren't given directly (WME01 Jan 2019 Q5).
Often asked as: particles hanging from strings; dragging at constant speed; rings on rods (WME01 Oct 2023 Q5a).
\(R = mg\) when another force has a vertical component.
Forgetting "constant velocity" means equilibrium.
Spec5.3Friction in equilibrium
Use \(F \leqslant \mu R\) for a particle in equilibrium.
The idea
Static friction only grows as large as it needs to be, up to a maximum:
\[F \leqslant \mu R\]
- Limiting equilibrium ("on the point of moving"): \(F = \mu R\).
- Friction acts to oppose the motion that would happen without it. "About to move up the slope" means friction acts down the slope.
Ranges of a force
To find the range of a force \(P\) that keeps a particle at rest on a slope, do two limiting cases: about to slide down (friction up), and about to slide up (friction down).
held by a horizontal force
A 4 kg particle is on a rough plane inclined at \(30°\), \(\mu = 0.3\), held by a horizontal force \(H\) N. It is on the point of moving up the plane. Find \(H\).
Perpendicular: \(R = 4g\cos 30° + H\sin 30°\). Parallel: \(H\cos 30° = F + 4g\sin 30°\), with \(F = 0.3R\).
\(H\cos 30° = 0.3(4g\cos 30° + 0.5H) + 2g \Rightarrow H(\cos 30° - 0.15) = 1.2g\cos 30° + 2g\).
\(H = 41.6\) N.
- M1 A1 for resolving perpendicular (including the component of the extra force), M1 A1 parallel, M1 for \(F = \mu R\) with the new \(R\), dM1 for solving, A1 (WME01 Jan 2017 Q6b).
- Inequalities: M1 for \(F \leqslant \mu R\) used correctly (\(F < \mu R\) or reversed is M0), then eliminate \(F\) and \(R\) (WME01 Jun 2023 Q6).
- "Show that \(\mu = \ldots\)" in limiting equilibrium: A1* needs a full, correct derivation (WME01 Jan 2026 Q7a).
Often asked as: on the point of slipping; find \(\mu\); find the range of a force; show an inequality on \(P\).
Friction in the wrong direction for the motion that is about to happen.
Reusing \(R\) from an earlier part when the forces have changed.