Kinematics of a particle moving in a straight line or plane

M2 Topic 1, spec point by spec point (Kinematics of a particle moving in a straight line or plane). Each spec point has the method, worked examples written the way the mark scheme wants them, how the marks go and the mistakes that cost the most marks.

The M2 paper (WME02) is 1 hour 30 minutes and 75 marks. It assumes M1 and the calculus from P1 to P4. Use \(g = 9.8\) m s⁻² and give answers to 2 or 3 significant figures after using it.

How maths marks work

M marks are for a correct method, even with a slip in the numbers. A marks are for accurate answers and need the M mark before them. B marks stand alone (a value or a statement). dM means the method mark depends on an earlier M mark.

ft (follow through) lets a later mark be earned from your own earlier wrong value. cso (correct solution only) means every step must be right, which is common on "show that" answers. awrt means "answers which round to", so keep extra figures and round at the end. isw means extra working after a correct answer is ignored.

When a question says "use algebra", "show all stages of your working" or "solutions relying on calculator technology are not acceptable", an answer with no method scores nothing, even if it is right.

Each spec point below has the idea behind it first, then the method, worked examples written the way a mark scheme would want, how the marks go, and the mistakes that cost the most marks. The paper references, such as (WMA11 Jan 2022 Q4), are past questions from the IAL Prep question bank that use the point.

Spec1.1Motion in a vertical plane with constant acceleration

Model motion in a vertical plane with constant acceleration, such as motion under gravity.

The idea

Under gravity alone the acceleration is constant: \(9.8\) m s⁻² downwards, i.e. \(\mathbf{a} = -9.8\mathbf{j}\) with \(\mathbf{j}\) up. The vector suvat equations from M1 apply:

\[\mathbf{v} = \mathbf{u} + \mathbf{a}t \qquad \mathbf{r} = \mathbf{u}t + \tfrac12\mathbf{a}t^2\]

Splitting into components, horizontal motion has no acceleration and vertical motion has acceleration \(-g\). The two are independent except that they share the same time \(t\). This is the basis of projectiles (1.2).

greatest height

A particle is projected from ground level with velocity \((4\mathbf{i} + 9\mathbf{j})\) m s⁻¹. Find the time to its greatest height and that height.

At the top the vertical velocity is 0: \(9 - 9.8t = 0\), so \(t = 0.918\) s.

\(0 = 81 - 2(9.8)h\), so \(h = 4.13\) m.

No bank questions test this point on its own: it appears inside every projectile question. Always state your positive direction.

Spec1.2Projectiles

Solve problems on the motion of a projectile.

The model

A projectile is a particle moving under gravity only (no air resistance, no spin). Launched at speed \(U\) at angle \(\alpha\) above the horizontal:

Horizontal Vertical (up positive)
Initial velocity \(U\cos\alpha\) \(U\sin\alpha\)
Acceleration \(0\) \(-g\)
Velocity at time \(t\) \(U\cos\alpha\) (constant) \(U\sin\alpha - gt\)
Displacement \(x = (U\cos\alpha)t\) \(y = (U\sin\alpha)t - \frac12gt^2\)

Strategy

Standard results you can derive: time of flight on level ground \(\frac{2U\sin\alpha}{g}\), range \(\frac{U^2\sin 2\alpha}{g}\), path \(y = x\tan\alpha - \frac{gx^2}{2U^2\cos^2\alpha}\). Derive them rather than quoting unless told otherwise.

show a launch speed

A golf ball is hit from \(O\) with horizontal and vertical velocity components \(3U\) and \(U\). It lands on level ground 120 m away. Show \(U = 14\).

Vertical: it lands with vertical velocity \(-U\), so \(-U = U - gt \Rightarrow t = \frac{2U}{g}\).

Horizontal: \(3U \times \frac{2U}{g} = 120 \Rightarrow U^2 = 20g = 196 \Rightarrow U = 14\).

from a cliff

A particle is projected at 12 m s⁻¹ at \(30°\) above the horizontal from a point 20 m above the ground. Find the time of flight, the horizontal distance and its speed and direction on landing.

Vertical: \(-20 = 6t - 4.9t^2 \Rightarrow t = \dfrac{6 + \sqrt{428}}{9.8} = 2.72\) s.

Horizontal distance \(= 12\cos 30° \times 2.72 = 28.3\) m.

Energy: \(v^2 = 12^2 + 2(9.8)(20) = 536\), so \(v = 23.2\) m s⁻¹. Vertical component \(6 - 9.8(2.72) = -20.7\), so it hits at \(\arctan\frac{20.7}{10.4} = 63°\) below the horizontal.

perpendicular to the start

Projected with velocity \((4\mathbf{i} + 7\mathbf{j})\) m s⁻¹. When is it moving perpendicular to its initial direction?

\((4\mathbf{i} + p\mathbf{j})\cdot(4\mathbf{i} + 7\mathbf{j}) = 0 \Rightarrow p = -\frac{16}{7}\). \(7 - 9.8t = -\frac{16}{7} \Rightarrow t = 0.947\) s.

  • M1 A1 for a vertical equation, M1 A1ft for a horizontal equation, A1 for the given answer with supporting work (WME02 Jan 2017 Q8a).
  • Least speed: M1 for the horizontal component, A1 (WME02 Jan 2021 Q7b).
  • Perpendicular directions: M1 for the scalar product, A1 for the vertical component, DM1 for the height or time, A1 (WME02 Jan 2024 Q8c).

Often asked as: the most examined M2 point (105 questions in the bank). Greatest height; time to land; range; speed and direction at a point; a projectile clearing a wall; finding the launch angle.

Giving the horizontal velocity an acceleration.

Using the full speed \(U\) instead of its components.

Losing the minus sign on a landing point below the launch point.

Spec1.3Velocity and acceleration when displacement depends on time

Find velocity and acceleration when displacement is a function of time, and solve \(\frac{dx}{dt} = f(t)\) or \(\frac{dv}{dt} = g(t)\).

The chain

\[x \xrightarrow{\;\frac{d}{dt}\;} v \xrightarrow{\;\frac{d}{dt}\;} a \qquad\qquad a \xrightarrow{\;\int dt\;} v \xrightarrow{\;\int dt\;} x\]

When the acceleration varies, the suvat formulas don't apply: use calculus.

Integrating needs a constant, found from a given condition (e.g. \(v = 3\) when \(t = 0\)).

Distance vs displacement

Displacement is \(\int v\,dt\) (signed). For distance travelled, find where \(v = 0\) (the particle turns round), then add the sizes of the displacements over each interval.

total distance

\(v = (2t - 3)(t - 2)\) m s⁻¹. Find the total distance travelled from \(t = 0\) to \(t = 3\).

\(v = 0\) at \(t = 1.5\) and \(t = 2\). \(x = \frac23t^3 - \frac72t^2 + 6t\) (with \(x = 0\) at \(t = 0\)).

\(x(1.5) = 3.375\), \(x(2) = \frac{10}{3}\), \(x(3) = 4.5\).

Distance \(= 3.375 + \left|\frac{10}{3} - 3.375\right| + \left(4.5 - \frac{10}{3}\right) = \frac{55}{12} = 4.58\) m.

  • M1 for differentiating (powers down by one), A1 for \(v\), A1* for showing \(v = 0\) at the time (WME02A Jun 2025 Q1a).
  • Distance: M1 for solving \(v = 0\), A1, M1 for integrating, A1, M1 for splitting at the turning points, A1 (WME02 Jan 2017 Q3).

Often asked as: when is the particle at rest; acceleration at a time; total distance; piecewise velocity functions (WME02 May 2024 Q2b).

Using suvat with non-constant acceleration.

Integrating straight across a time where \(v = 0\) for distance.

Spec1.4Differentiating and integrating vectors

Differentiate and integrate a vector with respect to time.

The idea

Do it component by component:

\[\mathbf{r} = f(t)\mathbf{i} + g(t)\mathbf{j} \;\Rightarrow\; \mathbf{v} = \dot{\mathbf{r}} = f'(t)\mathbf{i} + g'(t)\mathbf{j} \;\Rightarrow\; \mathbf{a} = \ddot{\mathbf{r}}\]

When integrating, the constant is a vector: \(\mathbf{v} = \int\mathbf{a}\,dt + \mathbf{c}\), found from a given velocity.

Combine with M1 ideas: speed \(= |\mathbf{v}|\); moving parallel to \(\mathbf{j}\) means the \(\mathbf{i}\) component of \(\mathbf{v}\) is 0; \(\mathbf{F} = m\mathbf{a}\); impulse \(= m(\mathbf{v} - \mathbf{u})\).

parallel to j

\(\mathbf{r} = (16t - 3t^3)\mathbf{i} + (t^3 - t^2 + 2)\mathbf{j}\). Find the velocity when \(P\) moves parallel to \(\mathbf{j}\), and the acceleration at time \(t\).

\(\mathbf{v} = (16 - 9t^2)\mathbf{i} + (3t^2 - 2t)\mathbf{j}\). Parallel to \(\mathbf{j}\): \(16 - 9t^2 = 0\), \(t = \frac43\).

\(\mathbf{v} = \left(\frac{16}{3} - \frac83\right)\mathbf{j} = \frac83\mathbf{j}\) m s⁻¹.

\(\mathbf{a} = -18t\,\mathbf{i} + (6t - 2)\mathbf{j}\).

integrating

\(\mathbf{a} = 6t\,\mathbf{i} - 2\mathbf{j}\) and \(\mathbf{v} = 2\mathbf{i} + \mathbf{j}\) when \(t = 0\). Find \(\mathbf{v}\).

\(\mathbf{v} = 3t^2\mathbf{i} - 2t\mathbf{j} + \mathbf{c}\), and \(\mathbf{c} = 2\mathbf{i} + \mathbf{j}\). So \(\mathbf{v} = (3t^2 + 2)\mathbf{i} + (1 - 2t)\mathbf{j}\).

  • M1 A1 for differentiating \(\mathbf{r}\), M1 for setting the \(\mathbf{i}\) component to 0, dM1 for solving and finding \(\mathbf{v}\), A1: the answer must be a vector (WME02 Oct 2018 Q3a).
  • Combined with impulse: M1 for \(\mathbf{I} = m(\mathbf{v} - \mathbf{u})\) (no \(g\), mass included), then Pythagoras (WME02 Jun 2025 Q2).

Often asked as: when moving parallel to a vector; acceleration magnitude at a time; position from acceleration with two constants of integration.

A scalar constant of integration.

Giving a speed when a velocity vector is asked.