Centres of mass

M2 Topic 2, spec point by spec point (Centres of mass). Each spec point has the method, worked examples written the way the mark scheme wants them, how the marks go and the mistakes that cost the most marks.

Spec2.1Centre of mass of particles

Find the centre of mass of a set of particles in one and two dimensions.

The idea

The centre of mass is the single point where all the mass could be put to give the same total moment. Take moments about an axis:

\[\bar{x} = \frac{\sum m_ix_i}{\sum m_i} \qquad \bar{y} = \frac{\sum m_iy_i}{\sum m_i}\]

It's a weighted average of the positions, weighted by mass.

an unknown coordinate

Particles \(2m\), \(3m\), \(7m\) are at \((4\lambda, \lambda)\), \((2, 4)\), \((4, -3)\). Show \(\bar{x} = \frac{4\lambda + 17}{6}\).

\(12m\bar{x} = 2m(4\lambda) + 3m(2) + 7m(4) = m(8\lambda + 34)\), so \(\bar{x} = \dfrac{8\lambda + 34}{12} = \dfrac{4\lambda + 17}{6}\).

an unknown mass

Particles \(m\), \(4m\) and \(km\) have \(y\)-coordinates 2, 3 and \(-4\). Their centre of mass is on the \(x\)-axis. Find \(k\).

\(\bar{y} = 0\): \(2m + 12m - 4km = 0 \Rightarrow k = 3.5\).

  • M1 for moments about an axis with all terms, A1 for a correct equation, A1 (or A1*) for the answer (WME02A Jun 2026 Q1a, WME02A Oct 2025 Q2a).
  • Frameworks of rods: mass is proportional to length; each rod's centre of mass is its midpoint (WME02 Jan 2021 Q4).

Often asked as: unknown positions or masses; frameworks; then hanging (2.3).

Forgetting a particle, or using the wrong total mass.

Spec2.2Centres of mass of laminas and composite shapes

Find centres of mass of uniform plane figures and simple composite figures, using symmetry and the formula booklet results.

The idea

For a uniform lamina, mass is proportional to area, so use areas in place of masses. Each standard shape's centre of mass is known:

Shape Centre of mass
Rectangle the centre
Triangle the average of the three vertices (\(\frac13\) of the height above any side)
Semicircle, radius \(r\) \(\frac{4r}{3\pi}\) from the diameter, on the axis of symmetry
Sector, radius \(r\), angle \(2\alpha\) \(\frac{2r\sin\alpha}{3\alpha}\) from the centre (formula booklet)

Use symmetry first: the centre of mass lies on any line of symmetry.

Composite shapes: use a table

Part Area \(\bar{x}\) \(\bar{y}\)
piece 1 ... ... ...
piece 2 ... ... ...
whole total \(\bar{x}\) \(\bar{y}\)

Then (total area)\(\bar{x} = \sum(\text{area} \times x)\). A hole is a negative area: whole shape minus the removed piece.

a trapezium

A uniform isosceles trapezium has parallel sides \(AD = 7a\) and \(BC = 5a\), and height \(3a\). Show its centre of mass is \(\frac{17a}{12}\) from \(AD\).

Split into a rectangle \(5a \times 3a\) (area \(15a^2\), centre \(1.5a\) from \(AD\)) and two triangles (total area \(3a^2\), centres \(a\) from \(AD\)).

\(18a^2\,d = 15a^2(1.5a) + 3a^2(a) = 25.5a^3\), so \(d = \dfrac{17a}{12}\).

square minus a triangle

\(OABCD\) has \(O(0, 0)\), \(A(6a, 0)\), \(B(6a, 3a)\), \(C(2a, 6a)\), \(D(0, 6a)\). Find its centre of mass.

It is the square \(OA \times OD\) (area \(36a^2\), centre \((3a, 3a)\)) minus the triangle with vertices \(B\), \(C\) and \((6a, 6a)\) (area \(\frac12 \times 4a \times 3a = 6a^2\), centre \(\left(\frac{14a}{3}, 5a\right)\)).

\(30a^2\bar{x} = 36a^2(3a) - 6a^2\left(\frac{14a}{3}\right) \Rightarrow \bar{x} = \frac{8a}{3}\) (distance from \(OD\)).

\(30a^2\bar{y} = 36a^2(3a) - 6a^2(5a) \Rightarrow \bar{y} = \frac{13a}{5}\) (distance from \(OA\)).

  • B1 for correct mass (area) ratios, B1 for the distances, M1 for a moments equation about an axis, A1 for each distance (WME02 Jan 2018 Q3a, WME02 Oct 2024 Q4a).

Often asked as: L-shapes, trapeziums, templates with shapes cut out, laminas with a semicircle added; then hanging or tilting (2.3).

Adding a removed piece instead of subtracting it.

Measuring each part's distance from a different axis.

Spec2.3Equilibrium of a lamina

Solve equilibrium problems for a plane lamina suspended from a point, free to rotate about a horizontal axis, or on an inclined plane.

Suspended from a point

When a lamina hangs freely from a point \(P\), its centre of mass \(G\) is directly below \(P\). So the line \(PG\) is vertical. To find the angle a side makes with the vertical, draw the right-angled triangle from \(P\) to \(G\) and use the distances you found.

Adding a particle

A particle at a corner moves the centre of mass. To make a particular side hang vertically (or horizontally), the combined centre of mass must lie on the right line: set up a moments equation with the unknown mass.

On an inclined plane

A lamina on a slope topples when the vertical line through \(G\) passes outside its base. On the point of toppling, \(G\) is directly above the lowest corner of the base.

hanging angle

The lamina \(OABCD\) from 2.2 hangs freely from \(D\). Find the angle between \(DO\) and the vertical.

\(G\) is \(\frac{8a}{3}\) from \(DO\) and \(6a - \frac{13a}{5} = \frac{17a}{5}\) below \(D\) (measured along \(DO\)).

\(\tan\theta = \dfrac{8/3}{17/5} = \dfrac{40}{51}\), so \(\theta = 38°\).

  • B1 for a centre of mass from earlier, M1 for the moments for the remaining lamina, A1 A1 for the equation, A1 for \(\theta\) (WME02 Oct 2024 Q4b).
  • Particle added: M1 moments with all terms, A1 A1, DM1 solve with the trig ratio, A1 for \(k\) (WME02 Jan 2019 Q4b).

Often asked as: the angle a side makes with the vertical; the mass of a particle that makes a side vertical; toppling on a slope.

Using the angle with the horizontal instead of the vertical (or the complement).

Measuring the distances to \(G\) from the wrong point.