Further kinematics
M3 Topic 1, spec point by spec point (Further kinematics). Each spec point has the method, worked examples written the way the mark scheme wants them, how the marks go and the mistakes that cost the most marks.
The M3 paper (WME03) is 1 hour 30 minutes and 75 marks. It assumes M1, M2 and the calculus from P1 to P4. Use \(g = 9.8\) m s⁻² and give answers to 2 or 3 significant figures after using it.
How maths marks work
M marks are for a correct method, even with a slip in the numbers. A marks are for accurate answers and need the M mark before them. B marks stand alone (a value or a statement). dM means the method mark depends on an earlier M mark.
ft (follow through) lets a later mark be earned from your own earlier wrong value. cso (correct solution only) means every step must be right, which is common on "show that" answers. awrt means "answers which round to", so keep extra figures and round at the end. isw means extra working after a correct answer is ignored.
When a question says "use algebra", "show all stages of your working" or "solutions relying on calculator technology are not acceptable", an answer with no method scores nothing, even if it is right.
Each spec point below has the idea behind it first, then the method, worked examples written the way a mark scheme would want, how the marks go, and the mistakes that cost the most marks. The paper references, such as (WMA11 Jan 2022 Q4), are past questions from the IAL Prep question bank that use the point.
Spec1.1Acceleration as a function of displacement or time
Solve straight-line motion problems where the acceleration depends on displacement \(x\) or time \(t\), setting up and solving \(\frac{dv}{dt} = f(t)\), \(v\frac{dv}{dx} = f(x)\), \(\frac{dx}{dt} = f(x)\) or \(\frac{dx}{dt} = f(t)\).
Choosing the form of acceleration
\[a = \frac{dv}{dt} = \frac{d^2x}{dt^2} = v\frac{dv}{dx} = \frac{d}{dx}\left(\tfrac12v^2\right)\]
| Acceleration given in terms of | Use |
|---|---|
| \(t\) | \(a = \dfrac{dv}{dt}\), integrate with respect to \(t\) |
| \(x\) | \(a = v\dfrac{dv}{dx}\), separate and integrate with respect to \(x\) |
| \(v\) in terms of \(x\), want \(a\) | differentiate: \(a = v\dfrac{dv}{dx}\) |
Why \(v\frac{dv}{dx}\) works: by the chain rule, \(\frac{dv}{dt} = \frac{dv}{dx}\cdot\frac{dx}{dt} = v\frac{dv}{dx}\).
To get time from \(v\) in terms of \(x\): \(v = \frac{dx}{dt}\), so separate: \(\int\frac{dx}{v(x)} = \int dt\).
Every integration needs its constant: use the starting conditions.
velocity, then position, from a(x)
A particle has acceleration \(\frac34\sqrt{x + 1}\), with \(x = 15\) and \(v = 8\) when \(t = 0\). Show \(v = (x + 1)^{\frac34}\) and find \(x\) in terms of \(t\).
\(v\dfrac{dv}{dx} = \dfrac34(x + 1)^{\frac12} \Rightarrow \frac12v^2 = \frac12(x + 1)^{\frac32} + C\). At \(x = 15\): \(32 = 32 + C\), so \(C = 0\).
\(v^2 = (x + 1)^{\frac32}\), so \(v = (x + 1)^{\frac34}\) (positive).
\(\dfrac{dx}{dt} = (x + 1)^{\frac34} \Rightarrow \int(x + 1)^{-\frac34}dx = \int dt \Rightarrow 4(x + 1)^{\frac14} = t + 8\) (using \(t = 0\), \(x = 15\)).
\(x = \left(\dfrac{t + 8}{4}\right)^4 - 1\).
force from v(x)
A 0.5 kg particle moves with \(v = 2x + 1\) m s⁻¹. Find the force on it when \(x = 4\).
\(a = v\dfrac{dv}{dx} = (2x + 1)(2) = 18\) at \(x = 4\). \(F = 0.5 \times 18 = 9\) N.
- M1 for the differential equation with \(v\frac{dv}{dx}\) (writing the acceleration as \(\frac{dv}{dx}\) or \(\frac{dv}{dt}\) scores nothing), M1 for separating and integrating, A1, A1* using the initial values (WME03 May 2024 Q3a).
- Force from speed: M1 for differentiating \(v\) (or \(\frac12v^2\)) with respect to \(x\), not \(t\), A1 A1, DM1 for \(F = ma\) (WME03A Jan 2026 Q1).
- Time: M1 for \(v = \frac{dx}{dt}\), M1 separate, A1, dM1 integrate, A1, dM1 constant, A1 (WME03 Oct 2020 Q5b).
Often asked as: show \(v\) is a given function of \(x\); find \(x\) as a function of \(t\); find the force at a point.
Using suvat (the acceleration isn't constant).
\(a = \frac{dv}{dx}\) (missing the \(v\)).
Forgetting the constant, or using the wrong condition to find it.