Elastic strings and springs

M3 Topic 2, spec point by spec point (Elastic strings and springs). Each spec point has the method, worked examples written the way the mark scheme wants them, how the marks go and the mistakes that cost the most marks.

Spec2.1Hooke's law

Use Hooke's law for elastic strings and springs.

Hooke's law

\[T = \frac{\lambda x}{l}\]

\(T\) is the tension (N), \(\lambda\) the modulus of elasticity (N), \(x\) the extension (m), \(l\) the natural length (m). \(\lambda\) is the force that would double the string's length.

Equilibrium problems

Draw the force diagram, find the geometry (lengths and angles), get the extension, use Hooke's law, then resolve.

For a particle at the midpoint of a string, each half has half the natural length and half the extension, so the tension is the same as using the whole string.

a particle hanging on a string between two points

A light elastic string has natural length 5 m and modulus 20 N. Its ends are fixed to two points on a ceiling 6 m apart, and a particle \(P\) hangs in equilibrium at the midpoint, 4 m below the ceiling. Find the weight of \(P\).

Each half is \(\sqrt{3^2 + 4^2} = 5\) m long, so the string is 10 m: extension 5 m. \(T = \frac{20 \times 5}{5} = 20\) N.

Vertical: \(2T \times \frac45 = W \Rightarrow W = 32\) N.

  • B1 for the stretched length or extension, M1 for Hooke's law, A1 for the tension, M1 for resolving with both tensions, A1ft, A1 (WME03A Jan 2026 Q4a).
  • "Show \(\lambda = \ldots\)": M1 A1 resolve, B1 trig value, M1 A1 Hooke's law, M1 eliminate \(T\), A1 cso (WME03 Jan 2019 Q4a).

Often asked as: particles hanging from strings or springs; find \(\lambda\), a tension or a mass; the first part of an energy or SHM question.

Using the stretched length instead of the extension.

Using the natural length of the whole string with the extension of half of it.

Spec2.2Elastic potential energy

Use the energy stored in an elastic string or spring in work–energy problems with kinetic, gravitational and elastic energy.

Elastic potential energy

\[\text{EPE} = \frac{\lambda x^2}{2l}\]

This is the work done stretching it: the area under the tension–extension graph, \(\int_0^x\frac{\lambda s}{l}\,ds\).

Work–energy with springs

\[\text{KE} + \text{GPE} + \text{EPE (start)} = \text{KE} + \text{GPE} + \text{EPE (end)} + \text{work against friction}\]

Each EPE term uses the extension (or compression) at that moment. If the string is slack at some point, its EPE there is 0.

released from the midpoint

The particle \(P\) (weight 32 N) from 2.1 is held at the midpoint of the ceiling line (string straight, length 6 m) and released from rest. Find its speed when it has fallen 4 m.

Start: extension 1 m, EPE \(= \frac{20 \times 1^2}{2 \times 5} = 2\) J. End: extension 5 m, EPE \(= \frac{20 \times 25}{10} = 50\) J.

GPE lost \(= 32 \times 4 = 128\) J. KE \(= 128 + 2 - 50 = 80\) J.

Mass \(= \frac{32}{9.8}\) kg, so \(\frac12 \cdot \frac{32}{9.8}v^2 = 80 \Rightarrow v^2 = 49\), \(v = 7\) m s⁻¹.

  • M1 for an energy equation with all the terms (initial and final EPE, GPE, KE), A1ft A1ft with at most one error then correct, A1 (WME03A Jan 2026 Q4b).
  • On rough slopes: B1 GPE change, B1 an EPE term, M1 A1 work against friction, M1 A1 the full work–energy equation, A1 (WME03 Oct 2020 Q3).

Often asked as: speed at a point; how far a particle moves before stopping; show \(\lambda\) is a given multiple of \(mg\) (WME03 Jan 2024 Q2a).

Using \(\frac{\lambda x}{l}\) (that's the tension) for the energy.

Using one EPE term when the extension changes from one non-zero value to another.