Motion in a circle

M3 Topic 4, spec point by spec point (Motion in a circle). Each spec point has the method, worked examples written the way the mark scheme wants them, how the marks go and the mistakes that cost the most marks.

Spec4.1Angular speed

Understand angular speed.

The idea

Angular speed \(\omega\) is the rate of turning, in radians per second. A point at radius \(r\) moving round a circle has speed

\[v = r\omega\]

Converting: \(n\) revolutions per minute is \(\frac{2\pi n}{60}\) rad s⁻¹. One revolution takes \(\frac{2\pi}{\omega}\) seconds.

converting

A wheel of radius 0.3 m turns at 120 rev/min. \(\omega = \frac{2\pi \times 120}{60} = 4\pi\) rad s⁻¹, and a point on the rim moves at \(0.3 \times 4\pi = 3.77\) m s⁻¹.

This point and 4.2 aren't tested on their own in the bank, but every circular-motion question uses them. Check whether a question gives \(v\) or \(\omega\) and use the matching form of the acceleration.

Spec4.2Radial acceleration

Know that a particle moving in a circle has acceleration towards the centre, in the forms \(r\omega^2\) and \(\frac{v^2}{r}\).

The idea

Even at constant speed, the direction of motion keeps changing, so the particle is accelerating. That acceleration points to the centre of the circle:

\[a = r\omega^2 = \frac{v^2}{r}\]

By Newton's second law there must be a resultant force towards the centre: \(F = mr\omega^2 = \frac{mv^2}{r}\). It is provided by real forces (tension, normal reaction, friction, gravity). There is no extra "centrifugal" force to add to the diagram.

tension in a horizontal circle

A 0.4 kg particle on a smooth table is attached to a string fixed at a point on the table and moves in a circle of radius 0.5 m at 3 m s⁻¹. The tension provides the central force: \(T = \frac{0.4 \times 9}{0.5} = 7.2\) N.

Adding a force "outwards" on the diagram.

Spec4.3Horizontal circles

Solve problems on uniform motion in a horizontal circle, including the conical pendulum, elastic strings and banked surfaces.

Method

  1. Force diagram. Identify the radius \(r\) of the circle (often found from the geometry).
  2. Vertically: no acceleration, so the vertical forces balance.
  3. Horizontally (towards the centre): resultant \(= mr\omega^2\) or \(\frac{mv^2}{r}\).
  4. Solve simultaneously.

Standard set-ups

banked track

A track is banked at \(\theta\) with \(\sin\theta = \frac35\) and radius 50 m. Find the speed at which no sideways friction is needed.

\(R\cos\theta = mg\) and \(R\sin\theta = \frac{mv^2}{50}\). Divide: \(\tan\theta = \frac{v^2}{50g}\).

\(v^2 = 50(9.8)\left(\frac34\right) = 367.5\), so \(v = 19.2\) m s⁻¹.

conical pendulum

A 0.2 kg particle on a string of length 0.5 m moves in a horizontal circle at 6 rad s⁻¹. Find the tension and the angle of the string with the vertical.

\(T = ml\omega^2 = 0.2 \times 0.5 \times 36 = 3.6\) N. \(\cos\theta = \frac{mg}{T} = \frac{1.96}{3.6}\), so \(\theta = 57.0°\).

  • B1 (or M1 A1) for resolving vertically, M1 for the horizontal equation with \(\frac{v^2}{r}\) or \(r\omega^2\), A1ft, DM1 for substituting trig values and solving, A1 (WME03A Jan 2026 Q6a).
  • With friction on a cone or slope: M1 A1 A1 vertical, M1 A1 A1 horizontal with \(F\) in a consistent direction, M1 for \(F = \mu R\), dM1 solve (WME03 Jan 2024 Q4).
  • Explanations: e.g. "the radius increases, so the total tension increases", referring to the right quantity (WME03 Jan 2021 Q3b).

Often asked as: conical pendulums; particles on strings attached to two points (WME03 Jun 2018 Q3a); banked tracks with maximum and minimum speeds; particles inside cones.

Using the string length as the radius.

Friction in the wrong direction for a maximum-speed question.

Spec4.4Vertical circles

Solve problems on the motion of a particle in a vertical circle.

The idea

The speed changes as the particle goes up and down, so use two tools:

  1. Energy to find the speed at any point: \(\frac12mu^2 = \frac12mv^2 + mgh\).
  2. Newton's second law towards the centre at that point: (forces towards centre) \(= \frac{mv^2}{r}\). At angle \(\theta\) to the downward vertical, the weight's component towards the centre is \(-mg\cos\theta\); at the top it is \(+mg\).

Complete circles: what's needed at the top?

Particle on Condition at the top
a string, or inside a smooth surface tension (or reaction) \(\geqslant 0\), which means \(v^2 \geqslant gr\)
a rod, or a bead on a wire speed \(> 0\) (the rod can push)

Leaving a surface

A particle on the outside of a sphere loses contact when the normal reaction becomes 0. A string goes slack when its tension becomes 0. After that it moves as a projectile.

complete circles on a string

A particle on a string of length \(l\) is projected horizontally from the lowest point with speed \(u\). Find the least \(u\) for complete circles.

Energy to the top: \(v^2 = u^2 - 4gl\).

At the top: \(T + mg = \dfrac{mv^2}{l} \Rightarrow T = \dfrac{m(u^2 - 5gl)}{l}\).

\(T \geqslant 0 \Rightarrow u^2 \geqslant 5gl\), so \(u \geqslant \sqrt{5gl}\).

leaving a sphere

A particle slides from rest at the top of a smooth sphere of radius \(r\). Where does it leave the surface?

At angle \(\theta\) from the top: energy gives \(v^2 = 2gr(1 - \cos\theta)\).

Towards the centre: \(mg\cos\theta - R = \dfrac{mv^2}{r}\). Leaves when \(R = 0\): \(g\cos\theta = 2g(1 - \cos\theta)\), so \(\cos\theta = \frac23\).

  • Energy: M1 with all terms (sin/cos swaps in the height are the common error), A1, A1* (WME03 Jun 2025 Q5a).
  • Radial equation: M1 A1, then dM1 to eliminate \(v^2\), A1 cso (WME03 Jun 2018 Q7a).
  • Complete circles: B1 for the correct condition (for a rod, "speed \(> 0\) at the top"; using \(T > 0\) for a rod is B0), M1 energy inequality, A1, A1* (WME03A Jan 2026 Q7a).
  • Breaking strings: find the tension at the bottom (the largest) and compare (WME03 Jan 2021 Q6b).

Often asked as: tension at a point; complete circles; where a particle leaves a surface or a string goes slack; then projectile motion afterwards.

Using \(v = 0\) at the top for a string (it needs \(v^2 \geqslant gr\)).

Height errors: a point at angle \(\theta\) from the top is \(r(1 - \cos\theta)\) below it.