Statics of rigid bodies
M3 Topic 5, spec point by spec point (Statics of rigid bodies). Each spec point has the method, worked examples written the way the mark scheme wants them, how the marks go and the mistakes that cost the most marks.
Spec5.1Centres of mass by integration and of composite bodies
Find centres of mass of uniform rigid bodies by integration and/or symmetry, and of simple composite bodies.
The integrals
Slice the body into thin pieces, take moments, and divide by the total.
| Body | \(\bar{x}\) |
|---|---|
| Solid of revolution about the \(x\)-axis | \(\bar{x} = \dfrac{\int x y^2\,dx}{\int y^2\,dx}\) (the \(\pi\) cancels) |
| Uniform lamina under \(y = f(x)\) | \(\bar{x} = \dfrac{\int xy\,dx}{\int y\,dx}\), \(\quad\bar{y} = \dfrac{\frac12\int y^2\,dx}{\int y\,dx}\) |
Standard results (formula booklet)
| Body | Centre of mass |
|---|---|
| Solid cone, height \(h\) | \(\frac34h\) from the vertex (\(\frac14h\) from the base) |
| Solid hemisphere, radius \(r\) | \(\frac38r\) from the plane face |
| Hemispherical shell | \(\frac12r\) from the plane face |
Composite bodies
Same table method as M2, with volumes as masses. Holes are negative. Measure every distance from the same reference point.
the cone result by integration
Show that a uniform solid cone of height \(h\) has its centre of mass \(\frac34h\) from the vertex.
Vertex at \(O\), axis along \(x\), radius \(y = \frac{r}{h}x\).
\(\bar{x} = \dfrac{\int_0^h x\cdot\frac{r^2}{h^2}x^2\,dx}{\int_0^h\frac{r^2}{h^2}x^2\,dx} = \dfrac{\frac{h^4}{4}}{\frac{h^3}{3}} = \dfrac{3h}{4}\).
cylinder with a hemisphere removed
A solid cylinder (radius \(4a\), height \(6a\)) has a hemisphere of radius \(3a\) removed from its top face. Find the distance of the centre of mass from \(O\), the centre of the top face.
Volumes: cylinder \(96\pi a^3\), hemisphere \(18\pi a^3\), remainder \(78\pi a^3\).
Distances below \(O\): cylinder \(3a\), hemisphere \(\frac38(3a) = \frac{9a}{8}\).
\(78\bar{x} = 96(3a) - 18\left(\frac{9a}{8}\right) \Rightarrow \bar{x} = \dfrac{357a}{104} = 3.43a\).
- Integration: M1 for \(\int xy^2\,dx\) over \(\int y^2\,dx\) with the right \(y\), A1, A1 for the integration and division, A1* (WME03 Oct 2021 Q7a, WME03 May 2024 Q5a).
- Harder integrals may need parts or identities (\(x\cos 2x\), \(\sin^2 x\)) (WME03A Jan 2026 Q5b).
- Composite: M1 A1 for volume ratios, B1 for distances, M1 A1ft for the moments equation with the removed part subtracted, A1 (WME03 Jan 2017 Q3).
Often asked as: derive a standard result; find the centre of mass of a composite solid; then hanging or toppling (5.2).
Forgetting to square \(y\) for a solid.
Using the hemisphere's \(\frac38r\) from the wrong face.
Spec5.2Equilibrium of rigid bodies
Solve simple equilibrium problems for rigid bodies, including suspension from a fixed point and a body on a horizontal or inclined plane.
Suspended from a point
The centre of mass hangs directly below the point of suspension. Draw the line from the point to \(G\) (vertical) and use the known distances to find an angle.
On a plane: toppling and sliding
A body on a plane is about to topple when the vertical through \(G\) passes through the lowest point of contact (the edge of the base). For a solid with base radius \(r\) and \(G\) a height \(\bar{y}\) above the base, on a plane at \(\alpha\):
\[\tan\alpha = \frac{r}{\bar{y}}\]
It is about to slide when \(\tan\alpha = \mu\) (from \(F = \mu R\), with \(R = mg\cos\alpha\), \(F = mg\sin\alpha\)). Whichever angle is smaller happens first as the plane is tilted.
toppling
The body from 5.1 stands on its base (radius \(4a\)) on a rough plane. Find the angle at which it is about to topple (assuming it doesn't slide).
\(G\) is \(6a - \frac{357a}{104} = \frac{267a}{104}\) above the base.
\(\tan\alpha = \dfrac{4a}{267a/104} = \dfrac{416}{267}\), so \(\alpha = 57.3°\).
a hanging hemisphere
A solid hemisphere of radius \(r\) hangs from a point on the rim of its plane face. Find the angle the plane face makes with the vertical.
\(G\) is on the axis, \(\frac38r\) from the plane face. From the suspension point, \(G\) is \(r\) along the face and \(\frac38r\) out from it.
\(\tan\theta = \dfrac{3r/8}{r} = \dfrac38\), so the face makes \(20.6°\) with the vertical.
- Toppling: M1 for \(\tan\alpha\) as (horizontal distance) over (height of \(G\)), A1 for the correct distances, A1 for the exact value (going straight to \(\alpha\) when \(\tan\alpha\) is asked loses the A) (WME03 May 2024 Q5c).
- Suspension: B1 for the right angle, M1 for the tan ratio, A1ft, A1 (WME03 Jun 2018 Q6c).
- Supported on rods or with added particles: moments about a convenient point (WME03A Jun 2026 Q5b).
Often asked as: a composite solid hanging or on a slope; find a ratio \(k\) of dimensions so it hangs at a given angle; topple or slide first.
Inverting the tan ratio.
Measuring the height of \(G\) from the wrong face.